|
|
|
Cock the carriage mechanism by placing your foot on the right or left cocking pedal (shaded yellow in the picture below). This cocking movement is similar to kick-starting a motorcycle as the movement is down and back in an arc. Once cocked, the shoe (shaded in blue) is now flat on the WHEELDOCK floor.
|
|
| Roll the bike into the dock until the front tire bumps into the stop (shaded purple)
|
 |
|
| Use your foot to press the trip release pedal (shaded red), which releases the air spring (shaded in pink) and clamps the wheel.
|
|
| At this point your motorcycle is secure against tipping.
|
|
| To remove the motorcycle, repeat Step 1 and roll motorcycle back.
|
|
| All WHEELDOCKS attach to the transport bar via dual mounting receivers with cross bolts and safety latches (shaded green).
|
|
| We do not recommend washing with high-pressure washers.
|
We provide technical support; email us for assistance.
In the table below, select either your bike make and model, or the front tire size to select the model of WHEELDOCK that is right for you. If you need help, please visit Dunlop Tires and use their original equipment guide to determine your tire size.
Basic WHEELDOCK
| Bike Make/Model |
Front Tire Size |
WHEELDOCK
Model |
Sport and Sport-Touring Bikes
(including most BMW bikes)
|
120/70-17 or 120/60-17
tires,
4.65" wide
|
Model #3 |
Honda Gold Wings,
Yamaha RoadStar and VStar (Classic and Silverado)
|
130/70-18 tires,
5.03" wide
|
Model # 4 |
Honda Valkyrie/VTX1800/Rune,
BMW R1200CL,
Yamaha Royal Star Venture,
Kawasaki Vulcan 2000 and
Kawasaki Intruder LC 1500
|
|
Custom |
Dirt Bike WHEELDOCK
| Bike Make/Model |
Front Tire Size |
WHEELDOCK Model |
Most Dirt Bikes 125cc and up
|
3 1/2" to 3 5/8" tires
|
DirtDock |
WHEELDOCKs for Harley-Davidson
| Bike Make/Model |
Front Tire Size |
WHEELDOCK Model |
Harley-Davidson
|
MH 90-21 tires,
3.38" wide
|
Model #1 |
Harley-Davidson
|
100/90-19 tires,
4.00" wide
|
Model #2 |
Harley-Davidson
|
MT90 B16 tires,
5.38" wide
|
Model # 5 |
Harley-Davidson 2009 touring bikes
|
130/80-17 tires,
5.05 wide |
Model #4 |
In the table below, all tires are assumed to be on STANDARD RIMS. If you have custom rims or a non-standard issue tire on your bike, please refer to the 'By Width' chart below.
If your bike is not listed above, or your tires are not listed above, we have provided the chart below to help you. To use this chart, measure the width of your tire from sidewall to sidewall at the widest point. You want to have a WHEELDOCK® that is no wider than 1/8 to 1/4" inch wider than you measure.
Downloadable Tire-Sizing Gauge
You can click here to download our tire-sizing gauge.
|
|
