INSTALLATION OF THE WHEELDOCK CHOCK ON A WOOD DECKED TRAILER
Step 1: Locate the wheel chock on the trailer deck in position.
Step 2: Mark the location for the chock mounting holes. Locate the mounting bolt holes in the narrow section of the keyed holes.
Step 3: Drill ½” hole through the deck.
Step 4: From underneath the trailer deck, tap the supplied T Nuts into the ½” holes.
Step 5: Mount the wheel chock onto the trailer deck using the supplied ½”-13 Button Head Cap Screws. This will ensure the T Nuts are pulled into place.
Step 6: From underneath the trailer deck, install (2) wood screws so that the body (threaded section) sets in the notch of the T Nut and the head of the screw overlaps the flange on the T Nut. Mounting bolt removed for clarity.