Wheel Chock Standard Mounting Hardware – Wood Deck

Photo Jul 02, 1 26 27 PM
Photo Jul 02, 1 33 21 PM
Photo Jul 02, 1 32 50 PM

Step 1: Locate the wheel chock on the trailer deck in position.

Step 2: Mark the location for the chock mounting holes.  Locate the mounting bolt holes in the narrow section of the keyed holes.

Step 3: Drill ½” hole through the deck.

Step 4: From UNDERNEATH the trailer deck, tap the supplied T Nuts into the ½” holes.


Step 5: Mount the wheel chock onto the trailer deck using the supplied ½”-13 Button Head Cap Screws.  This will ensure the T Nuts are pulled into place.

Step 6: From underneath the trailer deck, install (2) wood screws so that the body (threaded section) sets in the notch of the T Nut and the head of the screw overlaps the flange on the T Nut.  Mounting bolt removed for clarity.